Content Previous Next

PRTG Manual: Dell EMC Unity Enclosure Health v2 Sensor

<%NUMBERING1%>.<%NUMBERING2%>.<%NUMBERING3%> PRTG Manual: Dell EMC Unity Enclosure Health v2 Sensor

The Dell EMC Unity Enclosure Health v2 sensor monitors the health of a disk-array enclosure (DAE) or a physical or virtual disk processor enclosure (DPE) on a Dell EMC storage system via the Representational State Transfer (REST) application programming interface (API).

Dell EMC Unity Enclosure Health v2 Sensor

For a detailed list and descriptions of the channels that this sensor can show, see section Channel List.

Sensor in Other Languages

Dutch: Dell EMC Unity Enclosure Health v2
French: Dell EMC Unity état du boîtier v2
German: Dell EMC Unity Zustand des Gehäuses v2
Japanese: Dell EMC Unity Enclosure Health v2
Portuguese: Saúde do sistema Dell EMC Unity v2
Russian: Работоспособность дисковой полки Dell EMC Unity v2
Simplified Chinese: Dell EMC Unity 外壳运行状况 v2
Spanish: Dell EMC Unity salud del gabinete v2

Remarks

Consider the following remarks and requirements for this sensor:

Remark	Description
Credentials	This sensor requires credentials for Dell EMC.
Unity OE 5.x	This sensor only supports systems from the Dell EMC Unity family with Unity OE 5.x.
REST API	Dell EMC systems that provide a REST API are EMC Unity Family, EMC Unity All Flash, EMC Unity Hybrid, and EMC UnityVSA.
IPv6	This sensor supports IPv6.
Performance impact	This sensor has a very low performance impact.
Lookups	This sensor uses lookups to determine the status values of one or more channels.
Scanning interval	The minimum scanning interval of this sensor is 1 minute. The recommended scanning interval of this sensor is 5 minutes.
Multi-platform probe	You can add this sensor to a multi-platform probe.

Basic Sensor Settings

The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:

dellemc
dellemcenclosure
dellemcstorage
restsensor

For more information about basic sensor settings, see section Sensor Settings.

Dell EMC Specific

Setting	Description
Enclosure Name	The name of the enclosure that this sensor monitors.
Enclosure Type	The type of the enclosure that this sensor monitors.

Sensor Display

Setting	Description
Primary Channel	Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor. You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.
Graph Type	Define how this sensor shows different channels: Show channels independently (default): Show a graph for each channel. Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic. You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).
Stack Unit	This setting is only visible if you select Stack channels on top of each other above. Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Setting

Description

Primary Channel

Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor.

You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.

Graph Type

Define how this sensor shows different channels:

Show channels independently (default): Show a graph for each channel.
Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic.
You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).

Stack Unit

This setting is only visible if you select Stack channels on top of each other above.

Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Debug Options

Setting	Description
Result Handling	Define what PRTG does with the sensor result: Discard result (default): Do not store the sensor result. Store result: Store the sensor result and the last response in the \Logs\sensors subfolder of the PRTG data directory on the probe system. The file name is Result of Sensor [ID].log. This setting is for debugging purposes. PRTG overwrites this file with each scanning interval. This option is not available when the sensor runs on the hosted probe of a PRTG Hosted Monitor instance. In a cluster, PRTG stores the result in the PRTG data directory of the master node.

Setting

Description

Result Handling

Define what PRTG does with the sensor result:

Discard result (default): Do not store the sensor result.
Store result: Store the sensor result and the last response in the \Logs\sensors subfolder of the PRTG data directory on the probe system. The file name is Result of Sensor [ID].log. This setting is for debugging purposes. PRTG overwrites this file with each scanning interval.

This option is not available when the sensor runs on the hosted probe of a PRTG Hosted Monitor instance.

In a cluster, PRTG stores the result in the PRTG data directory of the master node.

Inherited Settings

By default, all of these settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if necessary. To change a setting for this object only, click under the corresponding setting name to disable the inheritance and to display its options.

For more information, see section Inheritance of Settings.

Channel List

Which channels the sensor actually shows might depend on the target device, the available components, and the sensor setup.

Channel	Description
Cooling Modules	The cooling modules status Up status: OK, OK But Minor Warning Warning status: Degraded, Minor Issue Down status: Critical Issue, Major Issue, Non Recoverable Unknown status: Unknown
Downtime	In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status.
Drives	The drives status Up status: OK, OK But Minor Warning Warning status: Degraded, Minor Issue Down status: Critical Issue, Major Issue, Non Recoverable Unknown status: Unknown
Health Status	The health status Up status: OK, OK But Minor Warning Warning status: Degraded, Minor Issue Down status: Critical Issue, Major Issue, Non Recoverable Unknown status: Unknown This channel is the primary channel by default.
Link Control Cards	The link control cards status Up status: OK, OK But Minor Warning Warning status: Degraded, Minor Issue Down status: Critical Issue, Major Issue, Non Recoverable Unknown status: Unknown
Power Consumption	The power consumption
Power Supplies	The power supplies status Up status: OK, OK But Minor Warning Warning status: Degraded, Minor Issue Down status: Critical Issue, Major Issue, Non Recoverable Unknown status: Unknown
Temperature	The temperature of the enclosure

KNOWLEDGE BASE

What security features does PRTG include?

https://kb.paessler.com/en/topic/61108