Content Previous Next

PRTG Manual: HPE 3PAR Drive Enclosure Sensor

<%NUMBERING1%>.<%NUMBERING2%>.<%NUMBERING3%> PRTG Manual: HPE 3PAR Drive Enclosure Sensor

The HPE 3PAR Drive Enclosure sensor monitors a drive enclosure of an HPE 3PAR storage system.

HPE 3PAR Drive Enclosure Sensor

For a detailed list and descriptions of the channels that this sensor can show, see section Channel List.

Sensor in Other Languages

Dutch: HPE 3PAR Schijfbehuizing
French: HPE 3PAR boîtier de lecteurs
German: HPE 3PAR Laufwerksgehäuse
Japanese: HPE 3PAR ドライブエンクロージャ
Portuguese: Gabinete de unidades do HPE 3PAR
Russian: Дисковая полка HPE 3PAR
Simplified Chinese: HPE 3PAR 驱动器机箱
Spanish: Gabinete de una unidad de disco HPE 3PAR

Remarks

Consider the following remarks and requirements for this sensor:

Remark	Description
Credentials	This sensor requires credentials for HPE 3PAR.
IPv6	This sensor supports IPv6.
Performance impact	This sensor has a very low performance impact.
Limits	This sensor has predefined limits for several metrics.
Scanning interval	The minimum scanning interval of this sensor is 1 minute. The recommended scanning interval of this sensor is 5 minutes.
Multi-platform probe	You can add this sensor to a multi-platform probe.
Knowledge Base	Knowledge Base: Where can I find the Web Services API (WSAPI) port for the connection to the HPE 3PAR system?

Basic Sensor Settings

The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:

enclosure
hpe
hpe3par
ssh

For more information about basic sensor settings, see section Sensor Settings.

HPE 3PAR Specific

Setting	Description
ID	The ID of the drive enclosure that this sensor monitors.
Enclosure Name	The name of the drive enclosure that this sensor monitors.
Drive Count	The number of drives in the enclosure that this sensor monitors.
Model	The model of the drive enclosure that this sensor monitors.
Form Factor	The form factor of the drive bays of the enclosure that this sensor monitors.

Sensor Display

Setting	Description
Primary Channel	Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor. You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.
Graph Type	Define how this sensor shows different channels: Show channels independently (default): Show a graph for each channel. Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic. You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).
Stack Unit	This setting is only visible if you select Stack channels on top of each other above. Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Setting

Description

Primary Channel

Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor.

You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.

Graph Type

Define how this sensor shows different channels:

Show channels independently (default): Show a graph for each channel.
Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic.
You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).

Stack Unit

This setting is only visible if you select Stack channels on top of each other above.

Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Debug Options

Setting	Description
Result Handling	Define what PRTG does with the sensor result: Discard result (default): Do not store the sensor result. Store result: Store the sensor result and the last response in the \Logs\sensors subfolder of the PRTG data directory on the probe system. The file name is Result of Sensor [ID].log. This setting is for debugging purposes. PRTG overwrites this file with each scanning interval. This option is not available when the sensor runs on the hosted probe of a PRTG Hosted Monitor instance. In a cluster, PRTG stores the result in the PRTG data directory of the master node.

Setting

Description

Result Handling

Define what PRTG does with the sensor result:

Discard result (default): Do not store the sensor result.
Store result: Store the sensor result and the last response in the \Logs\sensors subfolder of the PRTG data directory on the probe system. The file name is Result of Sensor [ID].log. This setting is for debugging purposes. PRTG overwrites this file with each scanning interval.

This option is not available when the sensor runs on the hosted probe of a PRTG Hosted Monitor instance.

In a cluster, PRTG stores the result in the PRTG data directory of the master node.

Inherited Settings

By default, all of these settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if necessary. To change a setting for this object only, click under the corresponding setting name to disable the inheritance and to display its options.

For more information, see section Inheritance of Settings.

Channel List

Which channels the sensor actually shows might depend on the target device, the available components, and the sensor setup.

Channel	Description
Downtime	In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status.
Average Drive Temperature	The average temperature of all drives in the drive bay This channel has default limits: Upper error limit: 60°C Upper warning limit: 50°C
Drives	The drives status Up status: Normal Warning status: Degraded Down status: Failed Unknown status: Unknown
Highest Drive Temperature	The highest temperature of all drives in the drive bay This channel has default limits: Upper error limit: 60°C Upper warning limit: 50°C
Interface Cards	The interface cards status Up status: Normal Warning status: Degraded Down status: Failed Unknown status: Unknown
Lowest Drive Temperature	The lowest temperature of all drives in the drive bay This channel has default limits: Upper error limit: 60°C Upper warning limit: 50°C
Power Supplies	The power supplies status Up status: Normal Warning status: Degraded Down status: Failed Unknown status: Unknown
State	The drive enclosure status Up status: Normal Warning status: Degraded Down status: Failed Unknown status: Unknown This channel is the primary channel by default.

KNOWLEDGE BASE

Where can I find the Web Services API (WSAPI) port for the connection to the HPE 3PAR system?

https://kb.paessler.com/en/topic/89717

What security features does PRTG include?

https://kb.paessler.com/en/topic/61108